|
Cold Cut Drill Bit Cooling Fluid is a revolutionary new product
that promises to extend the life of drill bits - from the smallest
CNC machine to the largest oil rig. Initial results from CNC machines
showed an increase in drill bit life from 20-40%.
For the oil and gas industry, lab tests have also shown NO damage
to the wall cake, and a 10-20% decrease in viscosity when Cold Cut
was added to drilling mud.
Based on a product formula called 'Cold Fire,' a fire suppressant
that has been used by firefighters for nearly 20 years, Cold Cut
works by absorbing the number one enemy of drill bits - heat. In
fact it reduces heat 21 times faster than water alone.
"We've taken a proven product - Cold Fire - and modified to
another application," said Randy Sellers of RDR Technologies.
"Cold Fire has been saving lives and property for nearly 20
years, and been proven in both the lab and the field, against some
of the toughest oil refinery fires and tanker fires around. Not
only does it put the fires out, it cools the fuel source instantly.
So we said, why not apply the same cooling properties of Cold Fire
to drilling operations?"
Cold Cut is a completely plant-based, organic, non-toxic and eco-friendly
product. Because it is water-based, it is perfect for oil and gas
drilling operations, which have come under fire in recent years
for putting dangerous chemicals back into the ground - chemicals
like sulfuric acid, which industry opponents say have a chance of
seeping into groundwater and aquifers. It can be mixed with almost
any drilling mud solution to help keep the drill bit cooler.
How well can Cold Cut cool hot metal? It can take a pile of burning
magnesium, with a temperature of 5600°, and make it cool to
the touch in less than 30 seconds! Just think what it can do for
your drill bit!
In downhole applications, the constant friction of the drill bit
against earth and rock causes the drill bit to heat up, making the
metal softer. The softer the metal, the duller the bit becomes,
until it reaches the point where it has to be replaced. Then the
entire drill string has to be pulled back out of the hole, each
section of pipe dismantled and set aside, until the drill bit itself
is pulled up and replaced. Depending on the depth of the hole, this
process can take either hours or days - days where there is no forward
momentum on getting the well into production, where the crews and
equipment rentals still need to be paid. By extending the life of
the drill bit by even one or two days, Cold Cut can save a drilling
company hundreds of thousands of dollars.
In CNC machines and other machine shop drilling practices where
cooling fluid is used,
Cold Cut Drill Bit Cooling Fluid promises to improve drill bit life
by 20-40 percent. In many machine shops and manufacturing facilities,
animal fat is used, which is messy, smells bad, and goes rancid
quickly. Cold Cut can be re-used, and there are no issues with hazardous
materials or the EPA, because it is a completely non-toxic product.
Cold Cut Drill Bit Cooling Fluid - a revolutionary product that
can help save money, time and material by greatly extending the
life of the drill bit. Call RDR Technolgoies at 405-702-0055 for
more information.
|
